Trang nhất
ĐIỆN CÔNG NGHIỆP
Bộ nguồn Weidmuller, Power Supply CP SNT 12W 24V 0.5A, 991884002
Bộ nguồn Weidmuller, Power Supply CP SNT 12W 24V 0.5A, 991884002
Đăng ngày 31-01-2019 01:19:20 PM - 578 Lượt xem
Mã sản phẩm: CP SNT 12W 24V 0.5A
Ordering data |
Types of | CP SNT 12W 24V 0.5A |
Order number | 9918840024 |
version | Power supply, switching power supply module, 24 V |
GTIN (EAN) | 4032248217519 |
Minimum number of packages | 1 pc(s). |
|
Size and weight |
width | 22.5 mm |
Width (inches) | 0.886 inch |
height | 92.4 mm |
Height (inches) | 3.638 inch |
deep | 112.4 mm |
Depth (inches) | 4.425 inch |
net weight | 151.9 g |
|
temperature |
Humidity at storage temperature | 20 to 90% RH |
Humidity at operating temperature | 20 to 85% RH without condensation |
Operating temperature | -20 °C...50 °C |
storage temperature | -40 °C...85 °C |
|
Input |
Input current at 115 Vac | 260 mA eff ± 20% |
Input current at 125 Vdc | 125 mA ± 20% |
Input current at 230 Vac | 180 mA eff ± 20% |
Input current at 250 Vdc | 65 mA ± 20% |
Wire connection | Screw connection |
Wiring range | 0.5 mm2...2.5 mm2 |
Input fuse | 2 A inert insurance (internal) |
Input voltage | 85...265 V AC, 120...300 V DC |
Input Current | 260 mA @ 115 V AC; 180 mA @ 230 V AC |
Input overvoltage protection | Varistor |
Input frequency | 50/ 60 Hz |
|
Output |
10...100% regulation under load | 0.6% |
Splicable | Do not |
Wire connection | Screw connection |
Wiring range | 0.5 mm2...2.5 mm2 |
Power failure bridging time | 30 ms @ 115 V AC / 80 ms @ 230 V AC |
Maximum residual wave | 0.1 % |
Regulation under input voltage | 0.2% |
Output maximum capacitance | 8000 μF |
Output side overvoltage protection | Varistor |
Output Power | 12 W |
The output voltage | 24 V |
Output voltage type | DC |
Output current | 0.5 A |
Overload protection | Surge current - / thermal disconnect |
Rated output voltage | 24 V DC ± 1 % |
|
General parameters |
EMC standard | IEC 61000-6 /-2, -3 |
Low pressure criterion | 73/ 23/ EWG |
Power factor correction | Do not |
Installation location, installation tips | Horizontal, on the rail TS 35 |
width | 22.5 mm |
Operating temperature | -20 °C...50 °C |
Operation display | LED green |
Effective coefficient at maximum load | 80% |
standard | DIN EN 50178, DIN EN 60950, IEC950 |
depth | 112.4 mm |
Protection level | IP20 |
height | 92.4 mm |
|
Insulation parameter |
Humidity at storage temperature | 20 to 90% RH |
Humidity at operating temperature | 20 to 85% RH without condensation |
Electrically isolated output - ground | 0.5 kV |
Electrical isolation, input - ground | 1.5 kV |
Electrical isolation, input - output | 3 kV |
Input/output rail insulation | 4 kV |
|
Signal communication |
Operation display | LED green |
-
-
cáp điện cao áp DC, AGG silicone high voltage wire 25 30KV 40KV ,0.5, 0.75, 1.5, 2.5, 4, 6mm2
Liên hệ
-
-
Vỉ Tạo Ẩm Bằng Sóng Siêu Âm 48V, 4 mắt, 6 mắt, 8 mắt, 10 mắt, 12 mắt, Vỉ phun sương siêu âm, Vỉ tạo sương, Vỉ tạo ẩm
Liên hệ
-
-
Bộ chuyển đổi tin hiệu, Weidmuller analog signal converter ACT20P-CI-2CO, 7760054115 (7940005785)
Liên hệ
-
-
Cuộn hút van từ, Solenoid Coil SRS2-5D/8D/5R/8R, SRS1-5D/8D/5R/8R
Liên hệ
-
-
Cảm biến tải, GUANG CE load cell YZC-528 100KG 200KG 300KG 500KG 1T 2T 3T
Liên hệ
-
-
Cảm biến tải, GUANG CE load cell YZC-328 500KG 300KG 200KG 100KG 50KG 30KG 20KG 10KG 5KG
Liên hệ
-
-
Cảm biến tải, GUANG CE load cell YZC-3 0.5T 10T 1T 20T 2T 3T 5T 8T
Liên hệ
-
-
Cảm biến tải, GUANG CE load cell YZC-526 100KG 200KG 300KG 500KG 1T
Liên hệ
-
-
Cảm biến tải, GUANG CE load cell YZC-9QS/10-30T
Liên hệ
-
-
Cảm biến tải, GUANG CE load cell YZC-665 150KG 200KG 300KG 500KG
Liên hệ
-
-
Cảm biến tải, GUANG CE load cell YZC-201 1t 30t 2t 3,5t 10t 15t 20t
Liên hệ
-
-
Cảm biến tải, GUANG CE load cell YZC-528 1T 2T 3T
Liên hệ
Bộ nguồn Weidmuller,r Power Supply CP SNT 12W 24V 0.5A, 9918840024