Bộ nguồn Phoenix,Phoenix power supply module QUINT-PS/ 1AC/24DC/ 3.5 ,2866747

Danh Mục Sản Phẩm

Bộ nguồn Phoenix,Phoenix power supply module QUINT-PS/ 1AC/24DC/ 3.5 ,2866747

Đăng ngày 31-01-2019 04:52:17 PM - 602 Lượt xem

Mã sản phẩm: QUINT-PS/ 1AC/24DC/ 3.5 ,2866747

product description

The QUINT POWER power supply
QUINT POWER circuit breakers provide maximum functionality and can be quickly thermally decoupled at six times the rated current, providing selective system protection and cost savings. Precautionary function monitoring ensures extremely high system availability because it can issue critical operating status reports before a fault occurs.
With the static power reserve POWER BOOST, heavy loads can be reliably started. The adjustable voltage covers all ranges between 5 V DC ... 56 V DC.

size

width	32 mm
height	130 mm
depth	125 mm
Spare terminal width	122 mm
Spare terminal height	130 mm
Alternate assembly view	35 mm

Environmental conditions

Protection level	IP20
Ambient temperature (running)	-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Ambient temperature (storage/transportation)	-40 °C ... 85 °C
Maximum relative humidity allowed (operating)	≤ 95 % (no condensation at 25 ° C)
Anti-interference	EN 61000-6-2:2005
Installation height	5000 m

Tình trạng sản phẩm:

: cáp điện cao áp DC, AGG silicone high voltage wire 25 30KV 40KV ,0.5, 0.75, 1.5, 2.5, 4, 6mm2 Liên hệ

: Vỉ Tạo Ẩm Bằng Sóng Siêu Âm 48V, 4 mắt, 6 mắt, 8 mắt, 10 mắt, 12 mắt, Vỉ phun sương siêu âm, Vỉ tạo sương, Vỉ tạo ẩm Liên hệ

: Bộ chuyển đổi tin hiệu, Weidmuller analog signal converter ACT20P-CI-2CO, 7760054115 (7940005785) Liên hệ

: Cuộn hút van từ, Solenoid Coil SRS2-5D/8D/5R/8R, SRS1-5D/8D/5R/8R Liên hệ

: Cảm biến tải, GUANG CE load cell YZC-528 100KG 200KG 300KG 500KG 1T 2T 3T Liên hệ

: Cảm biến tải, GUANG CE load cell YZC-328 500KG 300KG 200KG 100KG 50KG 30KG 20KG 10KG 5KG Liên hệ

: Cảm biến tải, GUANG CE load cell YZC-3 0.5T 10T 1T 20T 2T 3T 5T 8T Liên hệ

: Cảm biến tải, GUANG CE load cell YZC-526 100KG 200KG 300KG 500KG 1T Liên hệ

: Cảm biến tải, GUANG CE load cell YZC-9QS/10-30T Liên hệ

: Cảm biến tải, GUANG CE load cell YZC-665 150KG 200KG 300KG 500KG Liên hệ

: Cảm biến tải, GUANG CE load cell YZC-201 1t 30t 2t 3,5t 10t 15t 20t Liên hệ

: Cảm biến tải, GUANG CE load cell YZC-528 1T 2T 3T Liên hệ

Input data

Rated input voltage range	100 V AC ... 240 V AC
Input voltage range	85 V AC ... 264 V AC
	90 V DC ... 350 V DC
Maximum dielectric strength	300 V AC
AC frequency range	45 Hz ... 65 Hz
DC frequency range	0 Hz
PE discharge current	< 3.5 mA
Electricity consumption	1.4 A (120 V AC)
	0.8 A (230 V AC)
	0.9 A (110 V DC)
	0.4 A (220 V DC)
Rated power consumption	96 W
Shock surge current	< 20 A (typical)
Power failure bypass	> 20 ms (120 V AC)
	> 80 ms (230 V AC)
Input fuse	5 A (slow blow, internal)
Choose the right fuse	6 A ... 20 A (AC: Characteristics B, C, D, K)
Protection name	Transient surge protection
Protection circuit/component	Varistor

Output Data

Rated output voltage	24 V DC ±1 %
Setting range of output voltage (U _Set )	18 V DC ... 29.5 V DC (> 24 V DC, stable capacity limit)
Rated output current (I _N )	3.5 A (-25 °C ... 60 °C, U _OUT = 24 V DC)
POWER BOOST (I _Boost )	4 A (-25°C ... 40°C constant, U _OUT = 24 V DC )
Selective fuse (I _SFB )	15 A (12 ms)
attenuation	60 °C ... 70 °C (2.5%/K)
Even	Yes, for redundancy and increased capacity
Concatenation	Yes
Control deviation	< 1 % (load change, static 10% ... 90%)
	< 2 % (load change, dynamic 10% ... 90%)
	< 0.1 % (the input voltage varies by ±10%)
Residual wave	< 50 mV _SS (rated value)
Output Power	84 W
Typical response time	< 0.05 s
Maximum idle power consumption	3.5 W
Maximum rated load power loss	11 W

Overview

net weight	0.5 kg
Working voltage display	Green LED
effectiveness	> 88 % (230V AC and rating)
Insulation voltage input / output	4 kV AC (type test)
	2 kV AC (conventional test)
Insulation voltage input / PE	3.5 kV AC (type test)
	2 kV AC (conventional test)
Insulation voltage output / PE	500 V DC (conventional test)
Protection level	I
MTBF (IEC 61709, SN 29500)	> 1433000 h (25 °C)
	> 820000 h (40 °C)
	> 360000 h (60°C)
Installation location	Horizontal DIN rail NS35, EN60715
Assembly instructions	Can be installed side by side; horizontal spacing 5 mm, 15 mm for active components, 50 mm vertical spacing

Connect data, input

Connection method	Pluggable screw connection
Minimum cross section of rigid wire	0.2 mm2
Maximum cross section of rigid wire	2.5 mm2
Flexible wire minimum cross section	0.2 mm2
Maximum cross section of flexible wire	2.5 mm2
Minimum wire cross section AWG	20
Maximum wire cross section AWG	12
Stripping length	7 mm
Thread	M3

Connection data, output

Connection method	Pluggable screw connection
Minimum cross section of rigid wire	0.2 mm2
Maximum cross section of rigid wire	2.5 mm2
Flexible wire minimum cross section	0.2 mm2
Maximum cross section of flexible wire	2.5 mm2
Minimum wire cross section AWG	20
Maximum wire cross section AWG	12
Stripping length	7 mm
Thread	M3

Signal display connection data

Minimum cross section of rigid wire	0.2 mm2
Maximum cross section of rigid wire	2.5 mm2
Flexible wire minimum cross section	0.2 mm2
Maximum cross section of flexible wire	2.5 mm2
Minimum wire cross section AWG	20
Maximum wire cross section AWG	12
Thread	M3

Standards and specifications

Electromagnetic compatibility	Comply with the 2014/30/EU Electromagnetic Compatibility Directive
electric shock	18 ms, 30 g, in each spatial direction (according to IEC 60068-2-27)
Emission interference	EN 55011 (EN 55022)
Anti-interference	EN 61000-6-2:2005
Connection meets standards	CSA
Standard / procedure	EN 61000-4-2
Contact discharge	4 kV (strength test 2)
Standard / procedure	EN 61000-4-3
Frequency Range	80 MHz ... 1 GHz
Test field strength	10 V/m (strength test 3)
Frequency Range	1.4 GHz ... 2 GHz
Test field strength	3 V/m (strength test 2)
Standard / procedure	EN 61000-4-4
Remarks	Standard B
Standard / procedure	EN 61000-4-5
signal	1 kV (strength test 2 - asymmetric)
Standard / procedure	EN 61000-6-3
	EN 61000-4-6
Frequency Range	0.15 MHz ... 80 MHz
Voltage	10 V (strength test 3)
Standard - Electrical Safety	IEC 60950-1/VDE 0805 (SELV)
Standard - electronic equipment used in power installation and assembly of electronic equipment in power installation	EN 50178/VDE 0160 (PELV)
Standard - safe ultra low voltage	IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Standard - safety insulation	DIN VDE 0100-410
Standards - protection against inrush currents, basic requirements for protective isolation in electrical equipment	EN 50178
Standard - main co-wave current limit	EN 61000-3-2
Standard - Equipment Safety	BG (design test)
Standard - for medical certification	IEC 60601-1, 2 x MOOP
Shipbuilding industry license	Germanischer Lloyd (EMC 2), ABS, LR, RINA, NK, BV
UL certification	UL, UL 508
	UL/C-UL certified UL 60950-1
	UL ANSI/ISA-12.12.01 Class I, Class II, Groups A, B, C, and D (Hazardous Areas)
DeviceNet certification	DeviceNetTM Power Compliance Test
Vibration (operation)	< 15 Hz, amplitude ± 2.5 mm (according to IEC 60068-2-6)
	15 Hz ... 150 Hz, 2.3 g, 90 min.
Low voltage command	Comply with LV Regulation 2006/95/EC
Certification - for the needs of the semiconductor industry, in line with the mains pressure drop	SEMI F47-0706 Certificate of Conformity
Information Technology Equipment - Security (CB Certification System)	CB certification
Track application	EN 50121-4
Surge voltage category (EN 62477-1)	III

Environmental Product Compliance

China RoHS	Environmental protection period = 25;
	For more details on hazardous substances, please refer to the “Manufacturer Declaration” in the “Download Area”.

THÔNG TIN THANH TOÁN

BÙI MẠNH CƯỜNG STK: 106881392325 VietinBank - Chi Nhánh Hà Nội	BÙI MANH CƯỜNG STK : 19035178267018 Techcombank- TP Hải Phòng	BÙI MẠNH CƯỜNG STK : 0031000284789 Vietcombank - Chi Nhánh Hải Phòng
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Nguyễn Thị Hồng Nhung STK : 0031000878687 Vietcombank - Chi Nhánh Hải Phòng	Nguyễn Thị Hồng Nhung STK: 19036725222012 Techcombank, CN Ba Đình, Hà Nội	Nguyễn Thị Hồng Nhung STK : 113375269 ACB - Chi Nhánh Hải Phòng

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

TÂN THÀNH CAM KẾT

Sản phẩm, hàng hóa chính hãng.
Giá cả cạnh tranh.
Dịch vụ chăm sóc khách hàng tận tâm.

Thông Tin Công Ty

Giới thiệu về chúng tôi

Chính sách và quy định

Đã thông báo

Hỗ trợ khách hàng

THÔNG TIN LIÊN HỆ:
CÔNG TY TNHH THIẾT BỊ CÔNG NGHIỆP TTH
Trụ sở: số 124 ngõ 79 Yên Hoà-Cầu giấy-HN
Kinh doanh 1 : 0888.868.515 Kinh doanh 2 : 0816.861.515
Kinh doanh 3 : 0836.861.515 Kinh doanh 4 : 0916.861.515
Kinh doanh 5 : 0926.511.515 Kinh doanh 6 : 0917.971.515
Website: http://tanthanhtech.com
Website: https://vienthongtanthanh.com
Email: tthkinhdoanh@gmail.com
Email: tthkinhdoanh01@gmail.com

Bộ nguồn Phoenix,Phoenix power supply module QUINT-PS/ 1AC/24DC/ 3.5 ,2866747

Bộ nguồn Phoenix,Phoenix power supply module QUINT-PS/ 1AC/24DC/ 3.5 ,2866747

product description

size

Environmental conditions

Input data

Output Data

Overview

Connect data, input

Connection data, output

Signal display connection data

Standards and specifications

Environmental Product Compliance

TÂN THÀNH CAM KẾT

Kết nối với chúng tôi