Công ty TNHH công nghệ số Tân Thành

BECKHOFF - EL1502

BECKHOFF - EL1502

  • Đăng ngày 28-03-2018 04:20:59 PM - 182 Lượt xem
  • Mã sản phẩm: EL1502
  • EL1502 | Up/down counter 24 V DC, 100 kHz

    The up/down counter counts binary pulses, and transmits the counter state, in an electrically isolated form, to the higher-level automation device. In the EL1502 EtherCAT Terminal it is possible to choose the (32 bits) counting direction using the up/down input, the gate connection can be used to control the triggering. Using the Clock1 input it is possible to implement two (32 bits) counters. The EtherCAT Terminal contains two inputs that indicate their signal state via LEDs. Both outputs are switched according to the counter state, so that they can be used as fast control signals for field devices.

    The EL1502 device supports the distributed clocks function. This means that the counter can be read at constant intervals (DC precision << 1 µs).

    Technical data EL1502 | ES1502
    Connection technology 1 x up/down counter, 2 x up or down counter
    Specification EN 61131-2, type 1, “0”: < 5 V DC, “1”: > 15 V DC, typ. 5 mA
    Number of counters 1 or 2
    Nominal voltage 24 V DC (-15 %/+20 %)
    “0“ signal voltage -3…+5 V
    “1“ signal voltage 15…30 V
    Input current typ. 5 mA
    Counting frequency max. 100 kHz
    Distributed clocks yes
    Max. output current 24 V/0.5 A (short-circuit-proof) per channel
    Current consumption power contacts typ. 14 mA + load
    Current consumption E-bus typ. 130 mA
    Counter depth 32 bit
    Electrical isolation 500 V (E-bus/field potential)
    Bit width in the process image 48 bit counter input, 48 bit counter output
    Configuration no address setting, configuration via the EtherCAT master
    Special features set counters, switch outputs
    Weight approx. 50 g
    Operating/storage temperature -25…+60 °C/-40…+85 °C
    Relative humidity 95 %, no condensation
    Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
    EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
    Protect. class/installation pos. IP 20/variable
    Pluggable wiring for all ESxxxx terminals
    Approvals CE, UL, Ex

    0

    Tình trạng sản phẩm:


    EL1502 | Up/down counter 24 V DC, 100 kHz

    The up/down counter counts binary pulses, and transmits the counter state, in an electrically isolated form, to the higher-level automation device. In the EL1502 EtherCAT Terminal it is possible to choose the (32 bits) counting direction using the up/down input, the gate connection can be used to control the triggering. Using the Clock1 input it is possible to implement two (32 bits) counters. The EtherCAT Terminal contains two inputs that indicate their signal state via LEDs. Both outputs are switched according to the counter state, so that they can be used as fast control signals for field devices.

    The EL1502 device supports the distributed clocks function. This means that the counter can be read at constant intervals (DC precision << 1 µs).

    Technical data EL1502 | ES1502
    Connection technology 1 x up/down counter, 2 x up or down counter
    Specification EN 61131-2, type 1, “0”: < 5 V DC, “1”: > 15 V DC, typ. 5 mA
    Number of counters 1 or 2
    Nominal voltage 24 V DC (-15 %/+20 %)
    “0“ signal voltage -3…+5 V
    “1“ signal voltage 15…30 V
    Input current typ. 5 mA
    Counting frequency max. 100 kHz
    Distributed clocks yes
    Max. output current 24 V/0.5 A (short-circuit-proof) per channel
    Current consumption power contacts typ. 14 mA + load
    Current consumption E-bus typ. 130 mA
    Counter depth 32 bit
    Electrical isolation 500 V (E-bus/field potential)
    Bit width in the process image 48 bit counter input, 48 bit counter output
    Configuration no address setting, configuration via the EtherCAT master
    Special features set counters, switch outputs
    Weight approx. 50 g
    Operating/storage temperature -25…+60 °C/-40…+85 °C
    Relative humidity 95 %, no condensation
    Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
    EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
    Protect. class/installation pos. IP 20/variable
    Pluggable wiring for all ESxxxx terminals
    Approvals CE, UL, Ex
         

     



    TÂN THÀNH CAM KẾT

    • Sản phẩm, hàng hóa chính hãng.
    • Giá cả cạnh tranh.
    • Dịch vụ chăm sóc khách hàng tận tâm.

    Thông Tin Công Ty

    Đã thông báo

     


    THÔNG TIN LIÊN HỆ
    CTY TNHH CÔNG NGHỆ SỐ TÂN THÀNH [Bản đồ]
    Trụ sở công ty: Số 189, Nguyễn Văn Linh, P. Kênh Dương, Q, Lê Chân, TP. Hải Phòng
    VPGD: Số 165-Thiên Lôi, P Vĩnh Niệm, Q Lê Chân. TP Hải Phòng
    VPĐD: Số 191- P Chùa Láng. Q Đống Đa. TP Hà Nội
    Tel: 0225.8830.305  Fax: 0225.8830.305
    Kinh doanh 1: 091.797.1515
    Kinh doanh 2: 083.797.1515
    Kinh doanh 3: 091.686.1515
    Website: http://tanthanhtech.com/
    Website: http://vienthongtanthanh.com/
    Website: http://tanthanh-automation.com/
    Email: tanthanhdigitech@gmail.com

  • Kết nối với chúng tôi