Công ty TNHH công nghệ số Tân Thành

Chống sét mạng LAN,OVP-RJ45-E100/4-C ,tốc độ 10/100

Chống sét mạng LAN,OVP-RJ45-E100/4-C ,tốc độ 10/100

  • Đăng ngày 11-09-2018 02:37:58 PM - 2333 Lượt xem
  • Mã sản phẩm: OVP-RJ45-E100/4-C
  •  RJ45 series network signal surge protector is designed according to IEC and ITU-T related lightning protection standards. It adopts multi-level protection circuit, adopts imported high-speed protection device, low capacitance design, fast response, low output residual voltage and superior transmission performance. The interface adopts standard RJ45 shielded crystal head, which is suitable for over-voltage protection of ETHERNET 10/100/1000M BASET network equipment (such as SWTICH, HUB, ROUTER), suppresses high-voltage pulses on the line, and protects the back-end equipment from lightning and industrial surges. damage. 
     
               This product is made of metal casing, has good sealing performance, and has dustproof and anti-corrosion function. It is connected in series and installed between the protected equipment and the external line.
     

    Tình trạng sản phẩm:


    Technical Parameters:

     

    Product number

    Type

    RJ45-E100/4-C

    RJ45-E100/4-F

    Rated operating voltage

     U n

    5V 

    5V

    Maximum sustainable operating voltage

     U c

    5.8V 

    5.8V 

    Nominal discharge current (8/20μs)

    Line/line

    n

    350A

    350A

    Line/ground

    5KA 

    350A

    Maximum discharge current (8/20μs)

     I max

    10KA 

    Voltage protection level (@In)   

    Line/line

     

    ≤30V

     ≤30V

    Line/ground

     

    ≤500V

    ≤30V

    Transmission rate (3dB)

      Fg

    ~ 100MHz

     ~ 100MHz

    Interface form  

    RJ45

    Number of protection lines  

     1,2,3,6

    Housing material  

     Aluminum alloy

    Insertion loss

    lL

    ≤0.5dB 

    ≤0.3dB 

    Series resistor

    R

     2.2Ω

     0Ω

      

     
    Precautions:


    1. The product is connected in series. When installing, the lightning protection device is connected between the external line and the protected equipment according to the corresponding interface. 

    2. The components in the lightning protection device are strictly inspected, and no special maintenance is required during normal operation. Take it off, measure the resistance between input and output should be ≤ 3Ω, the resistance between each core to ground ≥ 10 Μ Ω. If the measured data does not meet the above requirements, indicating that the product is faulty, it should be replaced in time; 

    3. The lightning protection device should be well grounded, the lightning protection ground wire should be as short, thick and straight as possible, and the grounding resistance should comply with relevant national standards.

     

         

     



    TÂN THÀNH CAM KẾT

    • Sản phẩm, hàng hóa chính hãng.
    • Giá cả cạnh tranh.
    • Dịch vụ chăm sóc khách hàng tận tâm.

    Thông Tin Công Ty

    Đã thông báo

     


    THÔNG TIN LIÊN HỆ:
    CÔNG TY TNHH THIẾT BỊ CÔNG NGHIỆP TTH
    Trụ sở: số 124 ngõ 79 Yên Hoà-Cầu giấy-HN
    Kinh doanh 1 : 0888.868.515 Kinh doanh 2 : 0816.861.515
    Kinh doanh 3 : 0836.861.515 Kinh doanh 4 : 0916.861.515
    Kinh doanh 5 : 0926.511.515 Kinh doanh 6 : 0917.971.515
    Website: http://tanthanhtech.com
    Website: https://vienthongtanthanh.com
    Email: tthkinhdoanh@gmail.com
    Email: tthkinhdoanh01@gmail.com

  • Kết nối với chúng tôi