Công ty TNHH công nghệ số Tân Thành

Công tắc lưu lượng, water flow switch, flow switch HFS-25, HFS-20, HFS-15

Công tắc lưu lượng, water flow switch, flow switch HFS-25, HFS-20, HFS-15

  • Đăng ngày 10-01-2019 12:54:39 PM - 294 Lượt xem
  • Mã sản phẩm: HFS-25, HFS-20, HFS-15

  • HFS-25 HFS-20 HFS-15 water flow switch (factory direct supply, reliable quality, sensitivity number) 

    Guarantee quality, if there are any quality problems, we are responsible for free replacement, we are responsible for all shipping costs, gold quality, excellence
    1. Application of water flow switch: 
    The HFS series water flow switch produced by our company is mainly used in water treatment systems, central air conditioners, water-cooled units, etc. It is suitable for water, ethylene glycol and any other non-corrosive effects on brass and phosphor bronze. A liquid that has no effect on the sealing performance. 
    2. Working principle of water flow switch: 
    When the flow rate exceeds the set value, the fluid pushes the paddle and drives the top micro switch through the mechanical device in the water flow switch. The single-pole double-throw switch contact (SPDT) can make one loop conduct. , while cutting off the other circuit. the flow switch typically used require interlocks or " interrupter " protected place.Adjustable trimming and the number of paddle blades of a length , in order to meet the needs of different diameters and flow rates.

    2. Overview:
    The HFS-25 water flow switch has SPDT output for excellent performance and high reliability.It can be installed in water pipes or liquid pipes that are non-corrosive to copper. When the liquid flow reaches a certain rate, it can be less than the rated point, one of the circuits is closed, and the other circuit is open. 
    The HFS-25 water flow switch is only used for liquid media above 0 °C, and it can also be used for high-salt liquids, but not for dangerous liquids. 
    The HFS-25 water flow switch can be installed outdoors and can be installed horizontally or vertically in the pipeline. 
    The HFS-25 water flow switch is for operational control only. It is necessary to strengthen the responsibility of the installer and the limit control and alarm monitoring system to prevent the occurrence of control failure. 
    Note: The water flow switch cannot be hit by water. If a quick closing valve is installed downstream of the water flow switch, a throttle must be used.

    3. Product characteristics:                                      
    Shell protection level: IP54            output form: micro switch SPDT output 
    contact life: 100,000 times              using medium temperature range: -10 ~ 100 °C 
    working medium: air, water and oil        micro switch parameters: 5A ( Max.), 250VAC/DC) 
    Large pressure: 15bar,             material: brass or stainless steel, stainless steel


       4 , specifications and models:
     
     
    model Connection size Number of streams Factory setting (N ) Airtight test pressure ( Mpa) Remarks  
    Cut offmin Turn onMax  
    Max Min  
    HFS-10 G3/8 -19teeth 1 piece offixed pulp 0.5 1.5 1.6 1.0 Original copper valve body  
    HFS-15 G1/2 -14teeth 2 fixedsheets  0.5 1.5 1.6 1.0 Original copper valve body  
    HFS-20 G3/4 -14teeth 1 piece offixed pulp 0.5 1.5 1.6 1.0 Original copper valve body  
    HFS-25 G1 -11teeth  Fixed pulp sheet 5sheets 0.5 1.5 1.6 1.0 Original copper valve body  
     
     
     
     
     
     
     

     

    Tình trạng sản phẩm:



       4 , specifications and models:
     
     
    model Connection size Number of streams Factory setting (N ) Airtight test pressure ( Mpa) Remarks  
    Cut offmin Turn onMax  
    Max Min  
    HFS-10 G3/8 -19teeth 1 piece offixed pulp 0.5 1.5 1.6 1.0 Original copper valve body  
    HFS-15 G1/2 -14teeth 2 fixedsheets  0.5 1.5 1.6 1.0 Original copper valve body  
    HFS-20 G3/4 -14teeth 1 piece offixed pulp 0.5 1.5 1.6 1.0 Original copper valve body  
    HFS-25 G1 -11teeth  Fixed pulp sheet 5sheets 0.5 1.5 1.6 1.0 Original copper valve body  
     
     
     
     
     
     
     

     
         

     



    TÂN THÀNH CAM KẾT

    • Sản phẩm, hàng hóa chính hãng.
    • Giá cả cạnh tranh.
    • Dịch vụ chăm sóc khách hàng tận tâm.

    Thông Tin Công Ty

    Đã thông báo

     


    THÔNG TIN LIÊN HỆ
    CTY TNHH CÔNG NGHỆ SỐ TÂN THÀNH [Bản đồ]
    Trụ sở công ty: Số 37/213 Thiên Lôi, P. Vĩnh Niệm, Q, Lê Chân, TP. Hải Phòng
    VPĐD: Số 185- P Chùa Láng. Q Đống Đa. TP Hà Nội
    Tel: 0225.8830.305  Fax: 0225.8830.305
    Kinh doanh 1: 0917.971.515
    Kinh doanh 2: 0912.969.391
    Kinh doanh 3: 091.686.1515
    Website: http://tanthanhtech.com/
    Website: http://vienthongtanthanh.com/
    Website: http://tanthanh-automation.com/
    Email: tanthanhdigitech@gmail.com

  • Kết nối với chúng tôi