Công ty TNHH công nghệ số Tân Thành

Bộ lưu điện UPS APC SRC10000XLICH 10KVA/8000W

Bộ lưu điện UPS APC SRC10000XLICH 10KVA/8000W

  • Đăng ngày 18-01-2019 02:33:23 AM - 126 Lượt xem
  • Mã sản phẩm: APC SRC10000XLICH 10KVA/8000W
  • APC SRC6000XLICH 6000VA 4200W Built-in 12V5AH 16-section external 192VDC battery pack online host

    Tình trạng sản phẩm:


    SRC10000XLICH basic performance
    LCD graphic representation Text and simulations show operating modes, system parameters, and alarms.
    Smart-UPS Performance and Benefits
    Availability
    Automatic internal bypass Provides utility power to connected loads in the event of a UPS overload or failure
    Scalable runtime Allow more rapid uptime when needed
    Smart battery management Get the best battery performance, longevity and reliability with intelligent, precise charging technology.
    Hot swap battery Ensure a clean, uninterrupted power supply to protect the device throughout the battery replacement process
    Automatically restart the load after the UPS is shut down Once the utility power is restored, the connected device is automatically restarted.
    Temperature compensated battery charging Adjust the charging voltage according to the actual battery temperature to extend battery life
    Manageability
    Network management Provides remote management of UPS over the network
    Compatible with Infineon Manager For centralized management through APC's Infineon Manager software.
    SmartSlot slot Customize UPS performance with management card
    USB interface Manage UPS with USB port
    LED status indicator Quickly understand device and power status with video indicators.
    Serviceability
    User replaceable battery Easy to upgrade and replace batteries
    Automatic self-test Regularly self-check the battery to ensure that the battery that needs to be replaced is detected early.
    Predictive failure notification Early warning failure analysis provided ensures timely replacement of components
    Disconnect battery notification Warning when the battery cannot provide backup power
    Audible alarm Provide notice of changes to utility and UPS conditions
    Adaptability
    Plug and play external battery Ensures a clean, uninterrupted power supply when adding additional runtime to the UPS
    Flash upgradeable firmware Use the FTP to remotely install the maintenance version of the firmware.
    Rack/tower conversion Protect the initial investment in UPS when moving from tower to rack-mount environment
    System protection
    Power regulation Protect connected loads from surges, spikes, lightning, and other power disturbances.
    Input power factor correction Minimize installation costs by using small generators and wire connections
    Compatible generator When using generator power, ensure a clean, uninterrupted power supply to protect the equipment
    Cold start capability Provide temporary battery power when utility power is stopped
    Resettable line switch It is easy to recover from the overload with a replacement fuse.
    Certified by a security agency The product is tested and certified to ensure safe operation with the connected service provider equipment within the specified environment.
    Frequency and voltage adjustment Poor frequency and voltage conditions can be corrected without the use of a battery, providing higher availability.
     
    Official parameter link http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=SRC10000XLICH&total_watts=200    
    Output
    Output power capacity 8000 watts/10KVA
    Maximum configurable power 8000 watts/10KVA
    Output voltage adjustable range Configurable for 220 or 230V rated output voltage
    Rated output voltage 230V
    Waveform type Sine wave
    Full load efficiency 90%
    Output voltage distortion Less than 3%
    Output frequency (synchronized with the main frequency) 50/60 Hz +/- 3 Hz user adjustable +/- 0.1
    Crest factor 3:1
    Output voltage THD < 3% linear load
    bypass Built-in bypass
    Other output voltage 220,240
    Output connection (1) Hard Wire 3-wire (HN + G)
    Input
    Rated input voltage 230V
    Input frequency 40-70Hz (automatic sensing)
    Input terminal type Hard Wire 3 wire (1PH+N+G)
    Operating voltage range 160 - 280V
    Maximum input current 60A
    Other input voltage 220,240
    Adjustable input voltage range 100 - 280V
    Battery run time
    battery model VRLA
    Empty battery slot 1
    Typical charging time 3 hours
    Communication and management
    Interface port DB-9 RS-232, SmartSlot slot
    Number of smart slots available 1
    control panel The LED status display has a load and battery bar graph and "online", "battery on", "replace battery", "overload" and "bypass" indicators.
    Emergency shutdown Optional
    Audible alarm Alarm when the mains is out of power: Special low battery alarm overload continuous tone alarm
    Surge protection and filtering
    Surge suppression energy 420 joules
    filter Multi-stage noise filter in accordance with UL1449
    Physical index
    high 440.00 mm
    width 261.00 mm
    deep 663.00 mm
    Equipment installation effective height 6U
    net weight 86.50 KG
    Shipping weight 107.00 KG
    Transport height 526.00 mm
    Transport width 600.00 mm
    Transport length .750.00 mm
    colour black
    Number of products per shipping pallet 12.00
    surroundings
    working environment 0 - 40 °C
    Working relative humidity 0 - 95%
    Operating height 0-3000 meters
    storage temperature -20 - 50 °C
    Storage relative humidity 0 - 95%
    Storage height 0-15000 meters
    Audible noise from the surface of the device 55.00 dBA
    Online heat dissipation 652.00 BTU/hr
    Conformity
    Management agency certification EN 60950, EN/IEC 62040-2
    Environmental compliance requirements RoHS 7b Exemption, China RoHS, REACH: Does not include SVHC
    Standard warranty 2-year warranty or replacement (excluding battery), battery warranty or replacement for 1 year, extended internal authorization available, on-site service
    **The time required for the UPS to recharge to 90% of the battery capacity after discharging with a 50% rated capacity load.
     
         

     



    TÂN THÀNH CAM KẾT

    • Sản phẩm, hàng hóa chính hãng.
    • Giá cả cạnh tranh.
    • Dịch vụ chăm sóc khách hàng tận tâm.

    Thông Tin Công Ty

    Đã thông báo

     


    THÔNG TIN LIÊN HỆ
    CTY TNHH CÔNG NGHỆ SỐ TÂN THÀNH [Bản đồ]
    Trụ sở công ty: Số 37/213 Thiên Lôi, P. Vĩnh Niệm, Q, Lê Chân, TP. Hải Phòng
    VPĐD: Số 185- P Chùa Láng. Q Đống Đa. TP Hà Nội
    Tel: 0225.8830.305  Fax: 0225.8830.305
    Kinh doanh 1: 0917.971.515
    Kinh doanh 2: 0912.969.391
    Kinh doanh 3: 091.686.1515
    Website: http://tanthanhtech.com/
    Website: http://vienthongtanthanh.com/
    Website: http://tanthanh-automation.com/
    Email: tanthanhdigitech@gmail.com

  • Kết nối với chúng tôi