Công ty TNHH công nghệ số Tân Thành

Bộ hiển thị điều khiển áp suất, pressure controller GEFRAN 2500-1-1-0-0-0-1, 2500-1-1-0-0-2-1

Bộ hiển thị điều khiển áp suất, pressure controller GEFRAN 2500-1-1-0-0-0-1, 2500-1-1-0-0-2-1

  • Đăng ngày 23-08-2019 02:52:40 PM - 38 Lượt xem
  • Mã sản phẩm: 2500-1-1-0-0-0-1, 2500-1-1-0-0-2-1
  • GEFRAN 2500 high-precision pressure closed-loop controller, also known as pressure regulator, controller size is 96X96mm. The degree of protection is IP54 waterproof and dustproof. The panel is designed with a 6-button design and is easy to use. The first row is used for the current actual pressure, the second row is the pressure set point, the process value, and the third row is the control power. The left and right sides of the meter are displayed with columns in the column to judge the power, control deviation, relay alarm status and other information. GEFRAN 2500 Pressure Closed Loop Control Configurable Remote Setpoint Adjustment, External Switch Control Manual/Automatic Control Conversion, External Analog Input Control Manual Mode Power. More functions can be consulted our customer service, GEFRAN 2500 pressure closed-loop controller, mainly used in plastic extruder pressure closed-loop control, extrusion and injection pressure control, differential pressure control, textile, paper, plastic film production line strength control, Winding tension control. There are two logic outputs that can be set to the following different functions: Alarm Memory Reset, Endpoint Memory Reset, Calibration, Setpoint Remote Control, Hold, or keyboard input settings. The instrument can perform the following memory functions: maximum endpoint value, minimum endpoint level, endpoint value, etc. Two other optically isolated analog outputs are used to control signal output as well as input signals, remote setpoints, peaks, and more. • Tension meter, potentiometer, linear signal, TC, RTD2 group configurable input

    Tình trạng sản phẩm:


    • 2 auxiliary analog inputs 
    • Differential measurement 
    • High precision: 0.1 % fs ± 1 digit 
    • 6-wire tensiometer automatic calibration check 
    • Transmitter power supply and tension meter probe power supply 
    • PID control with 8 sets of optional parameters
    • 3-way configurable alarm, fault protection 
    • Controller and repeater up to 3 insulated analog outputs 
    • 4-digit digital inputs 
    • 4 relay outputs with configurable functions 
    • Extended band 4 configurable digital inputs and outputs 
    • Serial communication interface: RS485/RS 232 MODBUS RTU protocol 
    • Panel with 3 columns of 5-digit display and 2 bar graphs          
    TYPE: 1101-V-2R-0-1 M82 
    DES. M.12
    SUPPLY: 100-240VAC 50/60HZ 6VA
    MAT. 00466222                                                                                                                             
    Model: LT / PC / PK / PA1 / PY1 / ​​PY2 / PY3 / PZ12 / PZ34 / PME12 / PMI12 / PMA12 / IC / PCIR / PCIR101 / PCIR102
    6e0aefa6b8ab5ff506ba


    LT :
    广泛 Widely used in injection molding, machine tools and machining industries
    无限 Unlimited resolution
    行程 Itinerary: 50 to 900mm
    ⊙ Independent linearity: ±0.05%
    位移 Displacement speed: 5m/s, 10 m/s optional
    ⊙ Working temperature: -30 to +100 ° C
    多种 Multiple electrical connections
    ⊙ Protection level: IP60 (IP65 optional)
      LT displacement sensor
    PC :
    ⊙ Itinerary: 50 to 750mm
    使用寿命 Service life: >100 million times or >25×1000000 meters
    ⊙ Mechanically fixed and use double bead self-aligning connection
    ⊙Maximum angular displacement exceeds ±30o
    无限 Unlimited resolution
    ⊙ Independent linearity ± 0.05%
    ⊙ displacement rate up to 5m / s
    ⊙ Working temperature: -30 to +100 ° C
    ⊙ Protection level: IP65
      PC displacement sensor
    PK :
    ⊙ Itinerary: 100 to 2000mm
    ⊙Using M5 threaded mechanical connection
    无限 Unlimited resolution
    ⊙ Independent linearity ± 0.05%
    ⊙ Working temperature: -30 to +100 ° C
    使用寿命 Service life: >100 million times or >25×1000000 meters
    ⊙ Protection level: IP40
      PK displacement sensor
    PA1 :
    ⊙ Travel: 25 to 150mm
    ⊙ Mechanical connection with M4 thread
    ⊙ Unlimited resolution
    ⊙ Independent linearity ± 0.05%
    ⊙ displacement rate up to 5m / s
    ⊙ Working temperature: -30 to +100 ° C
    使用寿命 Service life: >100 million times or >25×1000000 meters
    ⊙ Protection level: IP40
    PA1 displacement sensor
    PY1 :
    ⊙ Travel: 25 to 150mm
    ⊙ Mechanical connection with M4 thread
    ⊙ Unlimited resolution
    ⊙ Independent linearity ± 0.05%
    ⊙ Displacement rate up to 10m/s
    ⊙ Working temperature: -30 to +100 ° C
    使用寿命 Service life: >100 million times
    Two-way support for the joystick
    ⊙ Protection level: IP40
      PY1 displacement sensor
    PY2 :
    ⊙ Widely used in injection molding, machine tools, painting and machining industries
    ⊙ Itinerary: 10 to 100mm
    Bidirectional support and return spring for the lever
    ⊙ top with M2.5 thread and stainless steel ball
    ⊙ Unlimited resolution
    ⊙ Displacement rate up to 10m/s
    ⊙ Working temperature: -30 to +100 ° C
    ⊙Life: >100 million times
    ⊙ Protection level: IP40
      PY2 displacement sensor
    PY3 :
    ⊙ Widely used in injection molding, machine tools, painting and machining industries
    ⊙ Itinerary: 10 to 50mm
    Bidirectional support and return spring for the lever
    ⊙ top with M2.5 thread and stainless steel precision bearing
    ⊙ Independent linearity up to ±0.1%
    ⊙ Unlimited resolution
    ⊙ Displacement rate up to 10m/s
    ⊙ Working temperature: -30 to +100 ° C
    ⊙Life: >100 million times
    ⊙ Protection level: IP40
      PY3 displacement sensor
    PZ12 :
    ⊙ Widely used in injection molding, machine tools, painting and machining industries
    ⊙Travel: 25 to 250mm
    机械Using brackets, self-aligning ball, flange for mechanical fixing
    ⊙ Independent linearity ± 0.05%
    ⊙ Unlimited resolution
    ⊙Lifetime>100 million times or >25×1000000 meters
    ⊙ Protection level: IP60
      PZ12 displacement sensor
    PZ34 :
    ⊙ Itinerary: 25 to 300mm
    机械Using brackets, self-aligning ball, flange for mechanical fixing
    ⊙ Independent linearity ± 0.05%
    ⊙ Unlimited resolution
    ⊙ Displacement rate up to 10m/s
    ⊙Lifetime>100 million times or >25×1000000 meters
    ⊙ Working temperature: -30 to +100 ° C
    ⊙ Protection level: IP60
      PZ34 displacement sensor
    PME12 : Reluctance linear displacement sensor
    ⊙Typical application: a wet or temporarily submerged environment
    ⊙ Itinerary: 50~1000mm
    ⊙Linear displacement sensor unobstructed shaft
    The magnetic pointer replaces the resistance axis used by conventional sensors, so the overall size is smaller.
    ⊙Protection rating: IP67 is completely waterproof
      PME12 displacement sensor
    PMI12 : Reluctance linear displacement sensor
    ⊙Typical application: It can be used in high pressure applications (static pressure 250bar, maximum 400bar) such as: hydraulic cylinder
    ⊙ Itinerary: 50~1000mm
    ⊙Linear displacement sensor unobstructed shaft
    ⊙Protection level: IP68 is completely waterproof
      PMI12 displacement sensor
    PMA12 : Reluctance linear displacement sensor
    ⊙Typical application: a wet or temporarily submerged environment
    ⊙ Itinerary: 50~1000mm
    ⊙ pointer magnetoresistance
    ⊙Mechanical anchoring and automatic alignment double bead rolling connection
    ⊙ Independent linearity ± 0.05%
    ⊙ Unlimited resolution
    ⊙Electrical connection: flexible polyurethane shielded cable output, 3 poles, 1m
    ⊙Lifetime>100 million times or >25×1000000 meters
    ⊙ Working temperature: -30 to +100 ° C
    ⊙ Protection level: IP67
      PMA12 displacement sensor
    IC :
    ⊙ Itinerary: 100 to 550mm
    机械 Mechanical fixing with internal or external flanges
    ⊙ Independent linearity up to ±0.1%
    ⊙ Displacement rate up to 1.5m/s
    ⊙Lifetime>100 million times or >25×1000000 meters
    ⊙ Working temperature: -30 to +100 ° C
    ⊙Maximum working pressure 340bar (5000 psi)
    IC displacement sensor
    PCIR : Signal Conditioner
    ⊙ High impedance input: >100Mohm
    ⊙Interface module integrated in the connector
    ⊙Standard output: 0~10V (PCIR, PCIR101)
    ⊙ standard output: 4 ~ 20mA (PCIR102)
    ⊙High linearity; low zero and full thermal drift
    ⊙ adjustable zero and full position
     PCIR: Signal Conditioner
    PCIR101/PCIR102 : Signal Conditioner
    ⊙Interface module integrated in the connector
    ⊙Standard output: 0~10V (PCIR, PCIR101)
    ⊙ standard output: 4 ~ 20mA (PCIR102)
    ⊙High linearity; low zero and full thermal drift
    ⊙ adjustable zero and full
         

     



    TÂN THÀNH CAM KẾT

    • Sản phẩm, hàng hóa chính hãng.
    • Giá cả cạnh tranh.
    • Dịch vụ chăm sóc khách hàng tận tâm.

    Thông Tin Công Ty

    Đã thông báo

     


    THÔNG TIN LIÊN HỆ
    CTY TNHH CÔNG NGHỆ SỐ TÂN THÀNH [Bản đồ]
    Trụ sở công ty: Số 189, Nguyễn Văn Linh, P. Kênh Dương, Q, Lê Chân, TP. Hải Phòng
    VPGD: Số 165-Thiên Lôi, P Vĩnh Niệm, Q Lê Chân. TP Hải Phòng
    VPĐD: Số 191- P Chùa Láng. Q Đống Đa. TP Hà Nội
    Tel: 0225.8830.305  Fax: 0225.8830.305
    Kinh doanh 1: 091.797.1515
    Kinh doanh 2: 083.797.1515
    Kinh doanh 3: 091.686.1515
    Website: http://tanthanhtech.com/
    Website: http://vienthongtanthanh.com/
    Website: http://tanthanh-automation.com/
    Email: tanthanhdigitech@gmail.com

  • Kết nối với chúng tôi