Trang nhất
ĐIỆN CÔNG NGHIỆP
Bộ điều khiển hiển thị cân, Keli XK3101N K weighing display controller
Bộ điều khiển hiển thị cân, Keli XK3101N K weighing display controller
Đăng ngày 17-01-2019 06:16:37 PM - 582 Lượt xem
Mã sản phẩm: Keli XK3101N K
The XK3101(N) is an electronic weighing instrument for industrial control applications (or other applications where analog output is required). The front-end signal processing uses a high-precision 24 -bit dedicated A/D converter. The analog signal output uses a 16 -bit D/A converter with an RS232/RS485serial communication interface. It is an aluminum alloy case that can be easily embedded in the control cabinet. Can be widely used in cement, chemical, metallurgical and other industries weighing systems.
-
-
cáp điện cao áp DC, AGG silicone high voltage wire 25 30KV 40KV ,0.5, 0.75, 1.5, 2.5, 4, 6mm2
Liên hệ
-
-
Vỉ Tạo Ẩm Bằng Sóng Siêu Âm 48V, 4 mắt, 6 mắt, 8 mắt, 10 mắt, 12 mắt, Vỉ phun sương siêu âm, Vỉ tạo sương, Vỉ tạo ẩm
Liên hệ
-
-
Bộ chuyển đổi tin hiệu, Weidmuller analog signal converter ACT20P-CI-2CO, 7760054115 (7940005785)
Liên hệ
-
-
Cuộn hút van từ, Solenoid Coil SRS2-5D/8D/5R/8R, SRS1-5D/8D/5R/8R
Liên hệ
-
-
Cảm biến tải, GUANG CE load cell YZC-528 100KG 200KG 300KG 500KG 1T 2T 3T
Liên hệ
-
-
Cảm biến tải, GUANG CE load cell YZC-328 500KG 300KG 200KG 100KG 50KG 30KG 20KG 10KG 5KG
Liên hệ
-
-
Cảm biến tải, GUANG CE load cell YZC-3 0.5T 10T 1T 20T 2T 3T 5T 8T
Liên hệ
-
-
Cảm biến tải, GUANG CE load cell YZC-526 100KG 200KG 300KG 500KG 1T
Liên hệ
-
-
Cảm biến tải, GUANG CE load cell YZC-9QS/10-30T
Liên hệ
-
-
Cảm biến tải, GUANG CE load cell YZC-665 150KG 200KG 300KG 500KG
Liên hệ
-
-
Cảm biến tải, GUANG CE load cell YZC-201 1t 30t 2t 3,5t 10t 15t 20t
Liên hệ
-
-
Cảm biến tải, GUANG CE load cell YZC-528 1T 2T 3T
Liên hệ
main feature
- S- △ type A / D conversion, resolution: 24 bits
- Update rate can be selected: 6.25 times / sec, 12.5 times / sec, 25 times / sec, 50 times / sec
- Two-point (normally open) relay output, output mode can be set: weight sorting mode and fixed value mode
- Isolated digital communication interface, optional RS232 and RS485 two ways
- Three calibration methods to suit calibration in a variety of situations
- The analog output type can be set: 4 ~ 20mA , 0 ~ 20mA , 0 ~ 5V or 0 ~ 10V
- 7 -digit LED digital tube display, word height 0.56 inch
- 20- segment light column indication
load capacity
Excitation voltage: 5.0VDC , can be driven . 6 only 350 W is an analog sensor.Analog current output: no more than 500 ΩAnalog voltage output: no less than 200 K ΩRelay contact capacity: AC 2A / 250V , DC 5A / 120Vperformance
Input sensitivity: greater than 1.5uV/dNonlinear: better than 0.01% FSDimensions (mm)90×170×103